High Air Flow Industrial pulse dust collector filter
Application field
1)Suitable for collecting a mass of floating dust in large area.
2)Apply to the big central dust collection system which has multistage, such as welding, grinding, polishing, cutting, drilling and so on.
3)Apply to the work condition which needs to recycling large amount of dust or particles, such as cutting, packing, grinding, spraying, powering, organic glass processing, car manufacturing, etc.
Specialty
1.Compact structure
It's floor space is much smaller than those bag filter vacuum cleaner by collecting the same quantity dust. What's more, VH-Z series equipment has much higher filtering efficiency, smaller running resistance, easier to be installed and moved. It's the best choice in large dust cleaning systems.
2.Easy to use and maintain.
The board door of cartridge using handle control switch which can ensure the tightness and also be convenient to open the door to see the cartridge usage.
It can be equipped with a negative pressure meter to monitor the operation situation of the machine.
Use large capacity container with caster, and have a fixed method of opening & closing the dust collector to make sure the airtightness and easy to cleaning.
3.High efficiency & reliable
Add a spoiler in the inlet to clean the dust in advance,and no need to equip the front cyclone device or spark trap. So it can reduce the cost generated by operating. And also reduce the speed of wind and improve the filtering efficiency.
Technical parameter
| Parameter,Model |
DMC-32 |
DMC-48 |
DMC-64 |
DMC-80 |
DMC-96 |
DMC-112 |
| Filtration Area(Square meter) |
24 |
36 |
48 |
60 |
72 |
84 |
| Filter wind speed(m/min) |
1.04~1.67 |
1.15~1.62 |
1.21~1.74 |
1.25~1.67 |
1.27~1.62 |
1.28~1.68 |
| Airflow(cubic meter/h) |
1500~2400 |
2500~3500 |
3500~5000 |
4500~6000 |
5500~7000 |
6500~8500 |
| Filter bags(pcs) |
32 |
48 |
64 |
80 |
96 |
112 |
| Air consumption(cubic meter/min) |
0.032 |
0.048 |
0.064 |
0.08 |
0.096 |
0.11 |
| Inlet concentration(g/Cubic meter n) |
200 |
| Exit concentration(mg/cubic meter n) |
50 |
| Injection pressure(MPa) |
0.5~0.7 |
Negative pressure
(Pa) |
5000 |
| Equipment resistance(Pa) |
≤1200 |
| Pulse valve |
Specification |
1" |
| Quantity(pcs) |
4 |
6 |
8 |
10 |
12 |
14 |
| Motor model and power |
Y90S-2 |
Y90L-2 |
Y100L-2 |
Y132S1-2 |
Y132S1-2 |
Y132S2-2 |
| (KW) |
1.5 |
2.2 |
3.0 |
5.5 |
5.5 |
7.5 |
| Weight |
DMC(A) |
1350 |
1620 |
1850 |
2360 |
2800 |
3200 |
| DMC(B) |
1220 |
1470 |
1670 |
2150 |
2540 |
2880 |
Our Main Products
Working Principle
Air classifier mill material would be conveyed by feeding system evenly to milling chamber, and would be impacted by highspeed rotating beater, and also under the centrifugal force, it would impact the grinding track. By several different pulverization powers, the material would be milled into fine powder. The milled powder would go with air flow up to the classifying chamber. With the help of adjustable classifier wheel,coarsepowder and fine powder would be separated. Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would fall down to themilling chamber to be milled again.
Technical Parameter
| MODEL |
ACM-5 |
ACM-15 |
ACM-30 |
ACM-50 |
ACM-60 |
ACM-100 |
ACM-120 |
| Parameter\ |
| Matched Powder(kw) |
Grinding Plate |
4 |
11 |
22 |
30 |
45 |
90 |
110 |
| Classifying wheel |
0.75 |
4 |
5.5 |
7.5 |
11 |
15 |
| Feeder |
0.35 |
0.37 |
0.55 |
1.1 |
| Air Flow(m3/h) |
250-500 |
1200-2000 |
2200-3600 |
3500-5500 |
4000-7500 |
7500-15000 |
9000-18000 |
| Rotation Speed (r/min) |
Grinding plate |
9000 |
5600 |
4600 |
4200 |
2900 |
2100 |
1800 |
| Classifying wheel |
900-3500 |
750-2800 |
700-2800 |
650-2600 |
600-2400 |
500-2000 |
400-1800 |
| Pulverizatin Fineness(μm) |
5-300 |
| Dimension(l×w×h)mm |
690×690×770 |
1300×650×750 |
1640×960×1030 |
2000×1200×1300 |
2000×1200×1300 |
2400×1500×1600 |
2400×2200×2600 |
| N.W(kg) |
300 |
600 |
1000 |
1600 |
2000 |
3000 |
3500 |
Work Included
Design and supply of a ACM Complete Milling system for the production .This includes design and supply of all ancillary items necessary for proper operation of the offered equipment including, but not limited to:
- Feed Bin and Feed Screw
- ACM-60 Pulverizing Mill
- Cyclones
- Bag filters/pulse dust collector with rotary valve
- Draft Fan
- Pipes /bracket
- One product collection systems with rotary valve
- Electrical Cabinet
Flow Chart ( ACM-60)
Related Engineering Cases
Technical support
Upon receiving the deposit, we will offer the following technical services:
1. Design for your production line flow and equipment layout, free of charge;
2. Provide foundation drawings of customer-ordered grinding mills and drawings of related parts, etc;
3. Technical parameters of peripheral equipment will be supplied;
4. Free technical suggestions on adjusting of equipment layout and application.
5. Equipment upgrading (customers need to pay the cost);
Quality assurance
1. Strictly conforming to ISO9001-2000 quality management system;
Audited Supplier 
){kind=link}